Posts tagged with "poly"



06. March 2017
Abstract We applied the Quality by Design (QbD) approach to the development of poly(lactic-co-glycolic acid) (PLGA) nanoparticle formulations encapsulating triamcinolone acetonide, and the critical process parameters (CPPs) were identified to clarify the correlations between critical quality attributes and CPPs. Quality risk management was performed by using an Ishikawa diagram and experiments with a fractional factorial design (ANOVA). The CPPs for particle size were PLGA concentration and...
08. November 2016
Abstract The objective was to investigate poly vinyl acetate (Kollicoat® SR 30 D) and ammonio methacrylate copolymer (Eudragit® RL 30 D) blends as coatings to increase the mechanical robustness of hydroxypropyl methylcellulose (HPMC) matrix tablets. Poly vinyl acetate (Kollicoat® SR 30 D – KSR) was selected for its flexibility and ammonio methacrylate copolymer (Eudragit® RL 30 D – ERL) because of its high permeability. Films based on KSR:ERL blends were prepared by casting or spraying...
07. October 2016
In this study, nanostructured microparticles was developed with polycaprolactone (PCL), poly(vinyl alcohol) (PVAL) and nanoparticles of the commercial sodium clay NT-25® by using the spray drying technique. The systems obtained were characte- rized by Nuclear Magnetic Resonance (NMR), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Dynamic Laser Light Scattering (DLS) and Differential Scanning Calorimetry (DSC). The NMR 13C and FTIR...
15. August 2016
Abstract The saturation solubility of PVP:PZQ physical mixtures (PMs) and solid dispersions (SDs) prepared from ethanol (E/E) or ethanol/water (E/W) by the solvent evaporation method at 1:1, 2:1 and 3:1 ratio (w/w) was determined. The presence of PVP improves the solubility of PZQ (0.31 ± 0.01 mg/mL). A maximum of 1.29 ± 0.03 mg/mL of PZQ in solution was achieved for the 3:1 SD (E/E). The amount of PZQ in solution depends on the amount of polymer and on the preparation method. Solid-state NMR...
17. July 2016
Abstract Objectives: This study was conducted to evaluate suitable methods of testing crush-resistant tablets composed largely of thermoplastic polymers. The objectives were, i) to evaluate the effect of thermal processes on crush resistance, ii) to develop test method(s) to indicate whether a crush-resistant tablet is susceptible to tampering by insufflation based on generated particle sizes, and iii) to find an appropriate analytical tool for discriminatory studies. Methods: We investigated...
14. March 2016
The aim of this study was to synthesize thiolated poly(vinyl alcohol) (PVA) and to evaluate its mucoadhesive properties. Thiourea and 3-mercaptopropionic acid were utilized in order to obtain thiolated PVAs, namely, TPVA1 and TPVA2, respectively. TPVA1 and TPVA2 displayed 130.44 ± 14.99 and 958.35 ± 155.27 μmol immobilized thiol groups per gram polymer, respectively, which were then evaluated regarding reactivity of thiol groups, swelling behavior and mucoadhesive properties. Both thiolated...
05. February 2016
The aim of this study was to enhance the dissolution and bioavailability of telmisartan (TLM), a poorly water soluble drug by comilling approach. Physical mixtures of TLM and poly(vinyl alcohol) (PVA) were comilled in a planetary micro mill in a dry condition by varying process parameters such as drug to polymer weight ratio, ball-to-powder weight ratio, and rotational speed. The comilled products that offered cumulative percentage dissolution of TLM above 75% in 30 min (CG 1 and CG2). These...
14. January 2016
The current study reports the preparation and characterization of sildenafil-loaded poly(lactide-co-glycolide) (PLGA)-based microparticles (MPs) by means of vibrational spray-drying. Emphasis was placed on relevant formulation and process parameters with influence on the properties of obtained powders. More
06. December 2015
The administration of drugs via the oral route is challenging due to the (bio)chemical aggressivity of the digestive system and to the presence of barriers that hinder cell uptake and access to the bloodstream. Indeed, the gastrointestinal tract is characterized by large variations of pH, the presence of enzymes and surfactants, and by absorption barriers such as mucus and the epithelium. More

Show more